Eurotops M 3002 Mode D'emploi page 5

ANALOG WATCH WORLD TIME
1. LED Lights to Indicate 24 Time Zones
2. Push Button for selection / setting
FEATURES
User selects the designated UTC (Coordinated Universal Time) time zone and the
hour and minutes hands will advance automatically to show the corresponding time.
The 24 flashing LEDs indicate the 24 main cities within the 24 respective time zone.
For example : London (Greenwich Time : reference meridian), Paris/Berlin : + 1h,
Cape Town : +2h...
OPERATING INSTRUCTIONS
The watch is installed with a battery and is in normal running condition. In normal
running condition, the watch shows current local time (hour and minutes). It is set up
in this way, by default, when purchasing.
All settings are done with pressures on the button.
WORLD TIME ZONE SELECTION
1. Press the button once, and the LED lights will turn on and scroll for one round
until the last one flashes, which represents the selected time zone. (The flashing LED
will turn off after 3 seconds and return to normal running condition if there is no
further activated command)
2. When the LED is flashing (duration is approximatively 3 seconds), quickly press
the button again to select other time zones. Each pressure on the button will
advance the LED to the next time zone. Once the right time zone chosen, wait 3
seconds. The hour and minute hands will automatically run to the corresponding
M 3002 / W0302
UK