Beka LED T-1000S Manuel D'utilisation page 8

User manual
2.2 Support chips:
TM-1803, 1804, 1809, 1812, 1829, 1903, 1904, 1912
UCS-1903, 1903B, 1909, 2903, 2909, 2912, 1912
WS-2811, 2801, 2803
SM-16711, 16716, 16726
P9813, 6803 etc.
Chip type
TM1803, TM1804, TM1809,
TM1812, TM1829
1903, 1909, 1912, 8205, 8206,
16703
UCS2903, UCS2909, UCS2912
1914, 9883
SM16711, SM16716, SM16726
LPD6803, LPD6812, LPD6813
P9813, WS2811
WS2801, WS2803
2.3 Definition of printing:
Buttons
SET Without SD card use it to choose the Chip type; if with SD card, use it to save file and speed.
MODE Change the file and mode.
SPEED+ Speed up
SPEED- Speed down
DC5V +5V power input
GND Power GND input
7.5-24V +7.5-24V power input
POWER Power indicator
ERROR Error indicator
SD CARD SD card slot
NOTE: For the TTL (SPI) signal, the controller signal ground must connect to the LED ground directly.
Software code &
Controller type
T-1000S-XXXX
Press speed+ and speed- at the same time the program will play circularly.
Lamps/ (MAX)
With high speed and low speed
With high speed and low speed
With high speed and low speed
2048 pixels
With high speed and low speed
With high speed and low speed
Meaning
TTL Signal
CLK Clock signal
DAT Data signal
GND Signal ground
T-1000S
Note
485 Signal
B Signal A
A Signal B
GND Signal ground
8