Troubleshooting; Technical Data; Limited Warranty - GreenWorks Commercial GTL100 Manuel Opérateur

EN
12

TROUBLESHOOTING

Problem
The motor shuts
down whilst
working.
The machine
smokes during
operation.
Motor runs but
tines do not
move.
13

TECHNICAL DATA

Voltage
No load speed
Cultivating path
Weight (without battery pack)
14

LIMITED WARRANTY

®
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, 2 year
commercial power train warranty, 2 year commercial
battery warranty against defects in materials, parts or
Possible cause Solution
Make sure that
The battery pack you tighlty instal-
is not installed led the battery
tightly. pack in the ma-
chine.
The battery pack Charge the bat-
is out of power. tery pack.
The machine Do not use the
has damage. machine and
speak to service
center.
1. Immediately
stop the ma-
chine.
The machine 2. Remove the
has damage. battery.
3. Speak to
service cen-
ter.
Do not use the
The machine machine and
has damage. speak to service
center.
Remove battery
The tines are then clear block-
blocked. age from the
tines.
Gear train fail- Speak to service
ure. center.
82 V
200 (±5%) RPM
10 in. (25 cm)
25.4 lbs. (11.5 kg)
English
workmanship. Greenworks
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been hired or
rented for industrial/commercial use, and that have
been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
2 YEAR LIMITED POWER TRAIN WARRANTY
COVERAGE:
– Motor
– PCB Boards
– Gear Box
– 2 years from the date of purchase (non transferable)
2 YEAR LIMITED BATTERY WARRANTY COVERAGE:
– Greenworks Commercial Battery Packs (GL 200, GL
250, GL 300, GL 400, GL 500, GL 900)
– 2 year from the date of purchase (non transferable)
60 DAY LIMITED WEARABLE PARTS WARRANTY
COVERAGE:
– Bars
– Blades
– Guards
– Chains
– Bump Feed Heads
– Tines
– 60 Days from date of purchase (non transferable)
WARRANTY EXCLUSIONS, LIMITATIONS AND
RIGHTS:
1. All warranties may not be transferred by the
consumer to any subsequent purchaser.
2. Parts or components not supplied by the warrantor,
or parts or components that have been modified.
3. Any failure resulting from the use of improper tools
or improper repair procedures.
4. Any failure resulting from the use of improper tools
or improper repair procedures.
5. Any failure or part that has become inoperative due
to accident, impact, abuse, misuse, neglect,
mishandling, dulling of cutting edges, or failure to
operate the product in accordance with the
information provided in the instruction manual
supplied with the product.
6. Routine maintenance items such as lubricants,
blade sharpening.
10
®
, at its own discretion will