Switching The Headset On/Off; Pairing The Headset - Belkin F8T064ea Manuel De L'utilisateur

Switching the Headset On/Off

To switch the headset on
1. Press the Talk button for about 5 seconds until you hear a low tone
followed by a high tone. The LED indicator flashes blue four times.
2. The headset switches on and enters standby mode. The LED indicator
continuously flashes blue every 3 seconds.
To switch the headset off
1. Press the Talk button for about 1 second until you hear a high tone followed by a low tone. The
LED Indicator flashes red four times.
2. The headset switches off and the LED indicator no longer blinks.

Pairing the Headset

Before using the headset, you must first pair it with a Bluetooth wireless technology enabled device,
such as a Bluetooth mobile phone.
Pairing is necessary for two Bluetooth devices to connect each other wirelessly. After creating a
paired link, you do not need to repeat the pairing process and the headset automatically links to the
mobile phone when both devices are switched on. Paring must be performed every time you want
to use the headset with a different Bluetooth mobile phone or other Bluetooth wireless technology
enabled devices. The headset can be paired simultaneously with up to 8 mobile phones.
12