Honeywell TP-COMPACT-WK Mode D'emploi page 17

USE & OPERATION (CONTINUED)
DRAINING THE WATER (CONTINUED)
2.2 Position the other end of the Continuous Water Drain Tube in the sink or drain. Make sure the
tube is not bent or kinked which might stop the water flow. Make sure the tube is secured over
the drain and will not fall out of place causing unwanted water spillage.
IMPORTANT: Make sure water can flow down the Continuous Water Drain Tube by keeping the tube
angled down and free of bends or kinks.
IMPORTANT: If the unit is placed on uneven ground, or the Continuous Water Drain Tube is installed
incorrectly, the water may fill the Water Tank and stop running. Please check whether the ground is
uneven and reinstall the Drain Tube.
EN 16