Description Of The Aroma Difusser; Technical Data; Trouble Shooting; Protection Of The Environment - Directive 2012/19/Eu - KLARBACH LB30806we Mode D'emploi

DESCRIPTION OF THE AROMA DIFUSSER

Mist Nozzle
Tank lid
Power button mist
control & Night light

TECHNICAL DATA

Ÿ Product name: Aroma diffuser - Mini humidifier
Ÿ Adaptor input: 100-240V~, 50/60Hz, 0.5A
Ÿ Adaptor output: 24V 0.5A
Ÿ Humidifier input: 24V 12W
Ÿ Moisture capacity: 80 ml/h
Ÿ Water tank volume: 0.8L
Ÿ Runtime: 8 / 12 h.
Ÿ
Dimension: 169(L) x169(W) x 104(H) mm
Ÿ
Coverage Area: 15-20 m²
Tank
Dry air inlet
Transducer
Body
LB30806we
19

TROUBLE SHOOTING

If your aroma diffuser is not working correctly please check the following
causes:
TROUBLE PROBABLE CAUSE
The unit does not operate. Power cable not plugged in
The power light is on, but
No water in water tank
there is no mist with wind
New machine.
The water mist produces
an unpleasant smell.
Dirty water or the water is
left in the water tank for
too long.
The power light is on, but
Too much water in the
the aroma diffuser
water flume
doesn't work
The transducer is dirty.
The output volume
of the mist is low
Water is too dirty or water
kept too long in the tank
Resonant in water tank when
water is too less
Abnormal noise
Unit is on an unstable surface
Very tight tank cap Over tightened
PROTECTION OF THE ENVIRONMENT -
DIRECTIVE 2012/19/EU
Discard the apparatus according to the European Directive
on the Waste of Electrical and Electronic Equipment
(WEEE). For more information, contact the competent local
authority for waste disposal.
ENG
SULTION
Plug in power cable.
Fill tank with water
Open the water tank
and leave it for 12 hours
at shady and cool place.
Clean the water tank
and change the water.
Pour away some water
from the water flume
Clean transducer by a
soft brush
Clean water tank and
change the water
Fill water into water tank
Move the unit to a
stable flat surface
Add liquid soap to cap
gasket for ease opening
20