Inserting A P2 Card - Panasonic AU-XPD3 P2 Mode D'emploi

Inserting a P2 Card

1
Insert a P2 card in the P2 card slot.
Press in the card until the EJECT button pops up.
u NOTE:
• Be sure to insert the P2 card horizontally. Forcing
the card in at an angle may damage it.
• Do not remove a P2 card while it is being
accessed or right after insertion. Otherwise, the
card may be damaged.
• Do not transport the drive with a P2 card inserted.
Otherwise, the P2 drive may be damaged.
• When the access indicator is lit orange, the driver
is performing processing, and even if a P2 card is
inserted it will not be recognized.
2
Fold the EJECT button in the direction of
the arrow.
u NOTE:
• Do not use the P2 drive with the EJECT button
fully extended. Otherwise, the EJECT button
could be damaged.
E-13
EJECT button