System Connection - Salora DVD-363M-HDMI Manuel D'utilisation

The use of remote control
REMOTE CONTROL OPERATION:
CARE OF REMOTE CONTROL
Aim remote control at remote sensor of DVD.
Do not drop the unit from a high position or
cause high impact.
Do not place the remote control in hot or moist
environments.
Do not splash water or any other liquid on
remote control.
Do not pull the remote control.
*point remote control directly to the remote sensor.
Pay attention to batteries in the remote control:
if the remote control is idle too long, please take
out the batteries inside.
Distance:
the remote control work best within 7 metres from
the DVD player.
Do not expose the remote control sensor directly to
a heat source or it will be malfunction.
Within 7 meters
POWER MUTE OPEN/CLOSE
SETUP TITLE/PBC
ENTER
ZOOM MENU
REV FWD
PLAY
STOP PAUSE
RESET DISPLAY
AUDIO ANGLE V-MODE
SLOW PROGRAM CLEAR N/P
REPEAT A-B RETURN USB/CARD
7

System Connection

Connecting to a TV with Audio/Video cable
Television
To video input(yellow)
To audio inputs(red, white)
To S-video input
If the TV has an S-video input, connect the DVD player with an S-video cable.
When using an S-video cable, do not connect the yellow videocab le.
Connecting to a Audio/system and TV equipped with YUV video input
Audio system
L
HDMI
R
To audio inputs of the amplifier
Connecting to TV and an amplifier equipped with Coaxial or Optical input
Amplifier
L
HDMI R
To COAXIAL
To Optical
type digital
type digital
audio input
audio input
Coaxial cable
OR
Optical Cord
DVD player
L Y Pb Pr
HDMI SCART OUTPUT
R COAXIAL VIDEO OPTICAL
S-VIDEO
To S-video output
DVD player
Y Pb Pr
SCART OUTPUT
COAXIAL VIDEO OPTICAL
S-VIDEO
To PR video input
To PB video input
To Y video input
DVD player
Television
Y Pb Pr
SCART OUTPUT
COAXIAL VIDEO
S-VIDEO OPTICAL
To CR/PR video input
To CB/PB video input
To Y video input
8
Television