Jung eNet FM 1561.07 Instructions D'utilisation page 14

eNet enjoliveur pour variapush avec récepteur radio
Deactivate wind alarm swit-
ching state
Priority, sun protection
Activate sun protection swit-
ching state
Deactivate sun protection swit-
ching state
Priority, twilight
Activate twilight brightness va-
lue
Deactivate twilight switching
state
Information window
In the Information window, the load can be controlled and the information about the device can
be displays.
Channel control/channel information
Display value
Current dimming value
Load state
Restraint
Operating hours
6.3 Accessoires
Fonctionnement avec tous les mécanismes encastrés de gestion de l'éclairage pour la commu-
tation et la variation.
6.4 Conformité
La société Albrecht Jung GmbH & Co. KG déclare par la présente que le type d'installation ra-
dio
Réf. FM..1561.07..
est conforme à la directive 2014/53/CE. La référence d'article complète figure sur l'appareil. La
déclaration de conformité CE intégrale est disponible aux adresses Internet suivantes :
www.jung.de/ce
32582723
J0082582723
On, Off
Basic setting: Off
0...4
Basic setting: 0
On, Off
Basic setting: On
On, Off
Basic setting: Off
0...4
Basic setting: 0
On, Off
Basic setting: On
On, Off
Basic setting: Off
Explanations
The load can be dimmed using the slider or a
brightness value entry. Only when "Function"
is set to "Light (Dimming)".
The load can be switched on or off.
Display of forced position status.
Display of the operating hours since the last
restart in the Settings window Einstellungen.
14/15
Defines the behaviour of the
output on deactivating the
wind alarm. Only visible when
the priority for the wind alarm
is 0.
Specifies the priority for recal-
ling and removing a scene of
type Sun protection for the
channel.
Defines the behaviour of the
output on activating the sun
protection.
Defines the behaviour of the
output on deactivating the sun
protection. Only visible when
the priority for the sun protec-
tion is 0.
Specifies the priority for recal-
ling and removing a scene of
type Twilight for the channel.
Defines the behaviour of the
output on activating the twi-
light function.
Defines the behaviour of the
output on deactivating the twi-
light function. Only visible
when the priority for the twi-
light function is 0.
27.04.2017