Bresser NATIONAL GEOGRAPHIC 9060100 Mode D'emploi page 16

When the AC port is not in use, turn it off to conserve power.
ATTENTION!: AC Outlets, AC output voltage and frequency will be different according to different countries or
areas. Please refer to the actual product before using.
Protection Mode:
Short-circuit/Overpower Protection: If the AC output is short circuited or overpowered (Load(s) pow-
er>80W), the unit will shutdown AC output to protect itself. Please resolve the problem and re-press the AC
button for AC output. Some devices, such as a refrigerator, an ice maker or a laser printer may require a surge po-
wer to start or work during a very short time period, the surge power could exceed 120W or even higher, this could
cause overpower protection with this unit. Please remove the devices and consult with the device manufacturers for
more information. Please resolve the problem and re-press the AC button for AC output.
(2) How to provide power for USB-C digital appliances with this product?
Connect the standard USB cable of the digital appliance to the USB output of the unit, press the
" " to turn on USB output.
Notice: Some smart devices, such as Bluetooth headphones and LED lights. Require very small input current
to charge, which could be less than 150mA. The unit may fail to charge these kind of smart devices due to
detection current limitation by the USB output ports. On this occasion, the user can press the AC button "
" to keep the USB port output running. Please turn off AC output - when the smart devices are fully charged -
to save power.
Quick Charge Output: This product supports Qualcomm Quick Charge 3.0 and USB C PD (Power Delivery)
2.0 Output, support: 5V/3A,9V/2A,12V / 1.5A 18W max output for smart devices which also support Qual-
comm Quick Charge 3.0 or USB PD2.0 Protocol. The actual output voltage and current depends on the indivi-
dual smart devices, it can be obtained by consulting the smart device manufacturer.
USB C
4) LED light
This unit is built with ultra-bright LED light. It supports 3 levels of brightness and SOS mode. Long press the
button " " for 3 seconds to switch on the LED light and single press the button to switch the higher bright-
ness/SOS mode/off.
Warning! Do not point directly at the eyes of humans in case of any damage due to
the strong light.
Switch on LED light Higher brightness SOS mode Switch Off
Low: 52 lm > Medium: 92 lm > High: 132 lm > SOS
16