Zero Function; Tare Function - Koenic KKS 3220 Mode D'emploi

English

Zero function

If the goods to be weighed amount is less than
200 g, then "o" appears on the display if the
TARA button is pressed.
Note
Under zero function, the to be weighted
good (less than 200 g) will not be deducted
from max capacity. However, never place
goods weighing more than 5 kg on the scale.

Tare function

If the goods to be weighed is more than 200 g,
then "T" appears on the display if the TARA
button is pressed once. If you press the button
again the total weight is shown.
Note
Under tare function, the to be weighted good
(more than 200g) will be directly deducted
from max capacity.
Troubleshooting
If there are any problems during operation, please refer to the following table. If problems cannot
be solved as indicated under Solution, please contact your manufacturer.
Problem
Product does not work • Batteries empty
12
IM_KKS3220_171208_V06_HR.indb 12
Possible causes
Cleaning and care
Warning!
• When cleaning, never use solvents or
abrasive materials, hard brushes, metallic
or sharp objects. Solvents are harmful to
human health and can attack plastic parts,
while abrasive cleaning mechanisms and
tools may scratch the surface(s).
• Never immerse any electrical parts of the
product in water or in other liquids during
cleaning. Never place it under running
water.
• Clean the product on the outside with a
soft, dry cloth. If necessary, use a slightly
moistened cloth to clean the housing. Dry
the housing carefully afterwards.
• Do not immerse the device into water or any
other fluids while cleaning.
• The container may be washed under water.
Solution
• Change batteries
8/12/17 5:45 pm