5
Click [Next].
The following dialog box appears.
6
Confirm the location of the
device driver.
Note
If the location is not
"X:\WIN2000.ME\SONYU2K.INF"
(where X is your CD-ROM drive letter),
click [Back] and return to step 3.
7
Click [Next] to install the device
driver.
8
When installation is complete,
click [Finish].
GB
8
Installing the
Windows 2000
Device Driver
This section explains how to install the
USB Floppy Disk Drive device driver on
a system running Windows 2000.
To install the device driver
1
Insert USB Floppy Disk Drive
Device Driver CD-ROM into the
CD-ROM drive of your
computer.
2
Connect the USB connector of
the USB Floppy Disk Drive to
the USB port of your computer.
The Found New Hardware wizard
starts and the following dialog box
appears.