Troubleshooting; Technical Specification; Environmental And Product Recycling - Vileda Electro EasyWring & clean Manuel D'utilisation

TROUBLESHOOTING

problem
Unit fails to operate
No light when charging.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.

TECHNICAL SpECIFICATION

Battery type
Charging period for fully discharged battery
Charger output
Charger input
Weight

ENvIRONmENTAL AND pRODUCT RECYCLING

The Vileda Electro EasyWring & Clean fulfils the EU directive 2002/96/CE, covering Electrical
and electronic appliances and the management of its disposal.
The packaging material is entirely recyclable, and marked with the recycling symbol. Follow
local regulations for scrapping. Keep the packaging materials (plastic bags, polystyrene parts,
etc.) out of children, as they are potentially dangerous.
When the product has reached the end of its life please do not dispose of it with general house-
hold waste. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
The symbol identified the Electro EasyWring & Clean as a product submitted to the regime
of selective electrical appliance recycling collection.
The product contains a NiMH battery which should not be disposed of with general household
waste. Call, or deposit the battery in an official collection point for its recycling.
Batteries can be detrimental for the environment and can explode if they are exposed to high
temperatures.
The violation of these precautions could cause fire and / or serious injuries.
For more detailed information about treatment, recovery and recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.
possible reason
• Battery flat.
• Battery damaged or me-
chanical defect.
• Charger not plugged cor-
rectly to mains socket.
• Charger not fully plugged
into main unit.
• Defective main socket or
charger.
possible solution
• Recharge battery for 16
hours.
• Contact Vileda Support
Line.
• Push the charger fully into
main socket.
• Push charger plug fully
into charging socket of main
unit.
• Contact Vileda Support
Line.
3.6V DC, 1300mAh NiMH
16 hours
6V DC, 150mA
100-240V, 50/60 Hz
62g
GB
5