Connecting Your Aroma Synergy Oil - Aromasound KUMO Mode D'emploi

Note: Only use the supplied AC power adaptor with this product. The battery can only be used as a
backup power supply for the clock and alarm. When the AC power is disconnected, the background of
the display panel will turn off.

Connecting your Aroma Synergy oil

• Remove the oil bottle from the box and then remove its bottle cap. This has a child-proof lock, so you
need to push it down and twist to unlock it.
• Unpack one of the diffuser wicks supplied in the box and insert it into the bottle. Do not push it all the
way in. You need to see about 6mm at the top of the bottle.
• Remove the diffusing compartment\nozzle from the Kumo product and then carefully screw the
bottle into the top until it is finger-tight.
• Place the diffusing compartment\nozzle back into the Kumo product. It can only fit one way and
should sit flat inside the curved bowl at the top of the Kumo.
• Turn the product on using the
mist is working. If not, please check that you have followed the above instructions correctly.
Aromasound App
• Your product is compatible with the Aromasound app. Visit the Apple App Store or Google Play
Store to download and install on your mobile device. This app will allow you to control the diffusion,
lighting, alarm settings and music. Full instructions of how to use the app can be found on the info
page within the app.
button and then complete a short-press to check that the diffuser
- EN 5 -