Applications And Techniques; After Finishing Work; Techniques; Picking Up Liquids - Abatement Technologies HEPA-AIRE V8000WD MK-2 Notice D'utilisation

V8000WD MK-2

5 Applications and techniques

5.1

Techniques

5.1.1 P icking up dry
substances
5.1.2 Picking up liquid

6 After finishing work

6.1 Switching the
vacuum cleaner
off and storage
5
If used correctly, additional
accessor ies, suction nozzles
and suction hoses, can enhance
the cleaningaction and reduce
the cleaning effort.
CA UTION!
Do not pick up flammable
substances.
C AUTION!
Do not pick up flammable
liquids.
Always remove the filter bag
and check the floater before
picking up liquids (see section
7.2.3 "Replacing the filter
element").
1. Switch off the vacuum
cleaner and pull the mains
plug out of the socket.
Effective cleaning is achieved if
you follow just a few guidelines
in combination with your own
practical experience in special
fields.
Here are some basic tips.
Before picking up dry sub-
stances with max.workplace
concentrations, always ensure
that a filter bag is inserted in
the tank (see section 9.5
"Accessor ies" for order
number). Disposal of the picked
up material is then simple and
hygienic.
After picking up liquids, the filter
element is wet. A damp filter
element clogs more quickly
when dr y substances are
picked up. For this reason the
filter element should be washed
and dried or replaced by a dry
element before dry substances
are picked up.
The use of a separate filter element
or filter screen is recommended.
If foam appears, stop work immed-
iately and empty the tank.
2. Wrap the power cord around
the motorhead as shown.
3. Empty the tank and clean the
vacuum cleaner.
4. After picking up liquids:
store the upper section of the
cleaner separately so that the
filter element can dry.
5. Store the cleaner in a dry
room where it is protected from
unauthorized use.