Cleaning And Maintenance - BASETech EJ1112 Mode D'emploi

8.

Cleaning and Maintenance

Before cleaning, switch of the appliance, disconnect from the mains and allow to cool
completely.
Never immerse the appliance in water or any other liquid. Protect it from splashes and spraying
liquid.
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals,
cleaning solvents or strong detergents.
9. Troubleshooting
The appliance will not switch
on.
The appliance automatically
switches itself off.
Please contact your dealer if problems persist.
© COPYRIGHT NOTICE
All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without the prior written consent of the copyright holder.
V. 01 – 22/06/2018
Problem
The appliance is not
connected to the mains.
The overheating protection
has been triggered.
The selected temperature has
been reached.
EJ1112
Possible cause
7
Possible solution
Connect to the mains.
Allow the appliance to cool
down.
Set a higher temperature.