Bresser 88-30000 Mode D'emploi page 13

LED lamp with headband
(F)
1@
J
(G)
I
1$ 1% 1^
Here are the individual parts of
your LED lamp with headband:
8 LED lights
9 On/off switch
10 Headband
11 Eyelets for the adjustment of the
headband length
12 Hinge for the adjustment of the
lamp
13 Battery compartment closure
14 Battery compartment
15 Battery holder
16 Batteries
1!
What you need to know
1)
Your headlamp has a strong LED light
(8). Since you place it on your fore-
head with the headband, you hands
will be free. In this way, you can use
other things without having to stand
around in the dark. This is really great
when you are going on an evening
walk with your parents.
1#
Putting on the LED lamp and
adjusting the headband length.
The head of every child is a different
size. Therefore, you have to adjust the
headband length to your head. Place
the headband (10) on your head. You
can adjust the length of the band by
moving the eyelets (11) towards the
front or towards the bank.
Turning the light on and off
In order to turn on the light, simply
press the on/off switch (9). You can
adjust the strength of the light in this
way:
Press 1x = 1 LED lights up
Press 2x = 3 LEDs light up
Press 3x = 7 LEDs light up
If you push the on/off button for a
forth time, you will turn off the light
again.
Changing the batteries
If the light gets weaker or doesn't
light up any more, you will have to
change the batteries (16). To do so,
simply remove the battery compart-
ment closure (13) by unscrewing
it clockwise from the fl ashlight. Tilt
the battery compartment (14) a little
towards the front, so that the battery
holder (15) with the batteries slides
GB
13