Indicator Light; How To Install The Batteries; Operation And Usage - Moman T1 Manuel D'instruction

Receiver
① Antenna
②
Battery Indicator
③ 3.5mm Audio Output Port
⑤ Channel Button
⑥
Volume Button
⑦ Screen Display

How to Install the Batteries?

1. Battery Requirement: 2pcs * AA batteries
2. Press the two clips to open the receiver/transmitter battery cover
3. Insert two batteries according to the positive and negative electrode
4. Close the battery cover
4
⑨ Receiving Status Light
⑩
Power Button
⑪ Battery Cover
⑫ Belt Clip
⑬ Cold Shoe Adapter

Indicator Light

Green Light Flickers(b)
Receiver
Red Light Keeps on(a)
Red Light Flickers(a)
Transmitter
Green Light Flickers(b)
Battery Indicator
Red Light Flickers

Operation and Usage

Receiver
① Attach the cold shoe adapter to the receiver, and mount it on the camera/
photographic equipment.
② Plug one end of the 3.5mm audio cable into the receiver's "LINE OUT"
socket and the other end into the camera's "MIC" interface.
③ Push the power button to turn on the device.
Transmitter
① Insert the lavalier mic into MIC socket of the transmitter.
② Push the power button to turn on the device.
③ Clip the receiver on your belt or put it in the pocket.
★ Long press "Channel" button, to change channel number.
★ Press "Volume" button to adjust the sound volume.
Sound Input
Channel Matches
Audio Distortion
Sound Input
Low Battery Power
5