Raider RDP-SBRH20 Mode D'emploi Original page 14

14 www.raider.bg
5.3. 3.Mode "Chiselling"
Press the release button and turn the switch operating modes into position
Make periodic breaks at work.
Keep and refer to the accessories carefully.
Do not throw the tool, do not overload, do not soak in water and other liquids do not use it for mixing adhesives and concrete
coatings.
5.3.4. "Drill Set Mode"
Press the release button and turn the mode switch to
6. Service and support.
6.1. Striking drill does not require additional lubrication or special maintenance. There are no parts requiring maintenance by
the user. Never use water or any liquid chemical cleaning drill. It should only be wiped with a piece of dry tissue. Should always
be stored in a dry place and ventilation holes in the body of the drill to be free.
6.2. The cordless perforator is equipped with a brushless electric motor.
6.3. The repair of your power is best carried out only by qualified specialists in workshops RAIDER, which used only original
spare parts. Thus ensuring their safe operation.
7. Environmental protection.
In view of environmental power tools, additional accessories and packaging must be subjected to appropriate
processing for reuse of the information contained in these materials.
Do not dispose of household waste power tools! Under the EU Directive 2012/19/EC on scrapped electrical and
electronic equipment and promoting law and national power tools, which can not be used more, must be collected separately
and be subjected to appropriate processing for recovery of contained therein scrap.