Oehlbach BTX 1000 Mode D'emploi page 15

∙ If you want to pair a different/new device, switch off the
BTX 1000 and disconnect the connected device from the
Bluetooth adapter.
∙ If the playback device is switched off or the Bluetooth
connection is lost, the BTX 1000 will remain in its standby
mode.
∙ If the BTX 1000 is switched off and then on again, it will
automatically establish a connection with the last connected
device, provided that its Bluetooth mode is still active.
Generally speaking, the BTX 1000 will be stored in your
smartphone, meaning that you don't need to search for it
again; you simply just need to select it from your list.
∙ If you want to connect a new device, you will need to start
the pairing process again (see „Pairing with Bluetooth
devices").
∙ You can use the BTX 1000 while it is being charged.
∙ If the BTX 1000 is in its standby mode, it will switch off
automatically after 5 minutes.
∙ To charge the BTX 1000 connect it to a compatible charger/
USB port by using the supplied USB cable. You can use a
standard USB charger or a USB charging port on your home
cinema/hifi equipment here.
BTX 1000
15