Publicité
Les langues disponibles
Les langues disponibles
User Guide
Thank you for buying the U120 universal adapter! This manual will help you
install and use it properly.
Introduction
To ensure this product is correctly installed and used appropriately, we
highly advise you to read this user guide very carefully. This charging unit
will ONLY supply power to the laptops which work under 120 Watts. Before
using the charger please check your Notebook/Netbook manufacturer's user
manual to ascertain the correct voltage. Please also check the compatibility
chart below for tip selection.
Safety instructions
IMPORTANT – installing and connecting this product in a way that does not
comply with accepted practices releases Infosec Communication from any
liability.
IMPORTANT – Contains small parts likely to be swallowed. Not suitable for
children under 36 months.
A charger belongs to the electronic and electrical equipment
category. At the end of its useful life it must be disposed of
separately and in an appropriate manner.
This logo means that this product answers to the EMC and LVD
If you don't want to keep the packaging, it must be recycled and disposed of
separately.
Package content
1. The main adapter U120*1
2. DC connectors *7
3. AC power cord *1
4. Standard DC cord *1
6. Instruction manual*1
Operation steps
1. Choose the correct tip for your Notebook/ Netbook (Check the compatibility chart).
2. Connect DC cable to the main charging unit.
3. Plug AC cable into the charger unit.
4. Plug AC cable into AC power source. Then, the red led turns on.
5. Plug the charger into your Notebook/Nerbook and it will power and charge immediately.
6. The laptop will be working normally if every step is doing correctly.
Operation & Notes
-
When sharing with different laptops, you only need to switch to the
correct intelligent tip which will adjust voltage automatically.
-
If the green led is flashing, it means the charger is overload. Please
check the connector voltage and the charger's power and make
sure it is the same as the laptop's voltage & power.
-
If your battery did not charge at all before you bought the charger,
and it is not charging (or only a little) since you've bought it, it
means your battery is out of order. Please remove it because you
could damage your laptop. Then your laptop will work normally as
long as it is plugged.
Technical specifications
U120 Classic
GENERAL SPECIFICATIONS
Power
Input
110-240V AC 1.6A 47/63 Hz
Output
16V/18.5V/19V/19.5V
CARACTERISTIQUES PHYSIQUES
Dimensions
132 x 58 x 31 mm
DxWxH
Weight
SALES INFO
Warranty
Note: See warranty conditions and register within 15 days after purchase on
the web site: www.infosec-ups.com
Compatibility Chart: Note/Netbook Connectors
1.
Always check that you have the unit set to the correct voltage.
Improper chosen voltage can damage your laptop.
2.
Please check each connector for an exact match if that is the
case. Never force a connector into a Net/Notebook. The
connection should be a firm but easy fit.
See connectors guide on the last page.
For any questions please contact Infosec Hotline.
When calling the After-Sales Department, please have the following
information ready, it will be required regardless of the problem: Charger
model, serial number and date of purchase. Please provide an accurate
description of the problem.
Connectors
/Connecteurs
M3
M4
M5
M6
120W
M7
M8
M12
330 g
2 years
INFOSEC UPS SYSTEM 4, rue de la Rigotière 44700 ORVAULT - France -
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr
Replacement
Voltage
Size /
for / Utilisé
/Tension
Dimension
pour
Sony, Fujitsu,
16V
6.5*4.4mm
Asus
18.5V
4.8*1.7mm
Compaq, Asus
Acer, Compaq,
Deita, HP,
Fujitsu,
19V
5.5*2.5mm
Gateway,
Toshiba, Liteon,
Asus
19V
5.0*3.0mm
Samsung
Acer, Compaq,
Deita, HP,
Fujitsu,
19V
5.5*2.1mm
Gateway,
Toshiba, Liteon,
Asus
19.5V
6.5*4.4mm
Sony
19V
7.4*5.0mm
HP Compaq
www.infosec.fr
– 06 13 AA 83 203 19
Publicité
