Using Home Pages - CoolStar WMTK13000 Manuel D'utilisation

3 USING HOME PAGES

When you turn on the wired controller, the system will enter the language selection page, You can choose your preferred
language, then press OK to enter the home pages. If you don't press OK in 60 seconds, the system will enter in the currently
selected language.
You can use the home pages to read out and change settings that are meant for daily usage. What you can see and do on
the home pages is described where applicable. Depending on the system layout, the following home pages may be possible:
Room desired temperature (ROOM )
Water flow desired temperature (MAIN)
DHW tank actual temperature (TANK) DHW=domestic hot water
home page1 ：
If the WATER FLOW TEMP. is set YES and ROOM TEMP. is set NON.(See ''FOR SERVICEMAN'' > ''TEMP. TYPE
SETTING'' in ''Installation and owner's manual (M-thermal split indoor unit)''). The system has the function including floor
heating and domestic water, home page 1 will appear:
Water flow desired temperature
NOTE
All the pictures in the manual are used to explain, the actual pages in the screen may have some difference.
home page2 ：
If the WATER FLOW TEMP. is set NON and ROOM TEMP. is set YES(See ''FOR SERVICEMAN'' > ''TEMP. TYPE
SETTING'' on ''Installation and owner's manual (M-thermal split indoor unit)''). The system has the function including floor
heating and domestic hot water, home page 2 will appear:
Room desired temperature
NOTE
The wired controller should be installed in the floor heating room to check the room temperature.
EN FR IT ES PL PT
O K
03
the system layout 1
UI
SV1
FHL1FHL2...FHLn
the system layout 2
UI
SV1
FFHL1FHL2.F..HLn