Reflexion Lift 2.0 Manuel Du Propriétaire page 9

installation guide
STEP 7
Uncoil the remote from the frame and extend from base. Ensure
remote is securely plugged in.
STEP 8
Carefully flip the base over on to its legs. Important: Two people
are required to move the bed base. Do not drag across the floor.
Do not rest frame on its side, excessive pressure may damage
the legs.
STEP 9
Plug the Power Cord into a power source.
A surge protector is recommended.
STEP 10
Quickly test remote functions to verify proper setup before
placing mattress on base. Return the base to a FLAT position
before placing the mattress on top.
For customer support, call Customer Service: 1-800-268-4414
STEP 11
To install the mattress retainer bar, insert each end of the
bar into the holes at the foot of the platform.
Setup is now complete!
Test all functions on remote.
7