Metabo HPT UC 18YFSL Instructions De Sécurité Et Mode D'emploi page 9

3. Charging
When inserting a battery in the battery charger, the pilot lamp will light up continuously in
red.
When the battery becomes fully recharged, the pilot lamp will blink in red. (At 1- second
intervals.) (See Table 2)
(1) Lamp indication
The indications of the pilot lamp will be as shown in Table 2, according to the condition of
the battery charger or the battery.
Before
charging
While
charging
Charging
complete
Pilot lamp
(red)
Overheat
standby
Charging
impossible
(2) Regarding the temperature of the rechargeable battery.
The temperatures for rechargeable batteries are as shown in the Table 3, and batteries that
have become hot should be cooled for a while before being recharged.
Rechargeable batteries
BSL1415, BSL1415X, BSL1425, BSL1430C,
BSL1430, BSL1440, BSL1450, BSL1815S,
BSL1815, BSL1815X, BSL1820, BSL1825,
BSL1830C, BSL1830, BSL1840, BSL1850,
BSL36A18, BSL1860
Table 2
Indications of the pilot lamp
Lights for 0.5 seconds. Does not
light for 0.5 seconds. (off for 0.5
Blinks
seconds)
Lights continuously
Lights
Lights for 0.5 seconds. Does not
light for 0.5 seconds. (off for 0.5
Blinks
seconds)
Lights for 1 second. Does not light
for for 0.5 seconds. (off for 0.5
Blinks
seconds)
Lights for 0.1 seconds. Does not
light for 0.1 seconds. (off for 0.1
Flickers
seconds)
Table 3
Battery overheated.
Unable to charge.
(Charging will
commence when
battery cools)
Malfunction in the
battery or the charger
Temperatures at which the
battery can be recharged
0°C – 50°C
English
9