Grasslin Talento 672 Mode D'emploi page 35

GB
Press the key once.
The weekday selection is
ended.
Note:
Enter the switching times and
the switching state
for the relevant switching state
(channel).
For standard switching
commands, see 7
For Impulse switching
commands, see 9
For cycle switching
commands, see 10
Note:
After the procedures
• read, modify or delete
the time, date, switching
program
• DCF synchronisation
• restoration of mains power
the switching state of the time
switch is updated automatically.
This means that:
• impulse switching commands
from earlier times are ignored
• active cycle switching commands
are re-started with the programme
ON-switching time
13
= ON
= OFF