Troubleshooting
Problem
The
Wireless
LAN/Bluetooth
modules cannot be detected.
The PC Camera module cannot be
detected.
The captured video files from the PC
Camera are taking up too much disk
space.
The computer is off (or in Sleep Mode)
but powered by the AC/DC adapter
plugged in to a working outlet or
powered by the battery with a capacity
level above 20%. I have plugged a
device into the powered USB port
in order to charge it, but the device is
not charging.
Possible Cause - Solution
The modules are off as the computer is in Airplane Mode. Check the LED indicator
and/or function key indicator to see if it is in Airplane Mode (see
the Fn + F11 key combination to toggle Airplane Mode on/off (see
The module is off. Press the Fn + F10 key combination in order to enable the module (see
Table 4 on page
10). Run the camera application to view the camera picture.
Note that capturing high resolution video files requires a substantial amount of disk space
for each file.
Note that the Windows system requires a minimum of 20GB (64bit) of free space on the
C: drive system partition. It is recommended that you save the capture video file to a
location other than the C:drive, limit the file size of the captured video or reduce video
resolution.
The port is not powered on. Toggle power to the port using the Fn + power button
combination.
This function may not work with certain external USB compliant devices (check your
device's documentation). If this is the case, power the computer on and connect the
external USB device in order to charge it.
Table 2 on page
8). Use
Table 4 on page
10).
27