Sport-thieme 2269939 Instructions De Montage Et Utilisation page 15

Plug the jack for the stroke counter
(74) into the socket (75) located on the
aluminium rail support, as shown in
Fig.8.
10 FOLDING YOUR UNIT.-
To fold your unit, Fig.9, do the
following:
1.- First lock the seat (68) onto the
rack on the aluminium rail (52), Fig.G.
Pull out the locking pin (63) and swing
the rear support (62) forward and
reinsert the locking pin (63).
2.- Use one hand to pull the knob (59)
back, Fig.G, and use the other hand to
lift the sliding seat rail until you hear
the knob (59) click into position, Fig.H.
11.- UNFOLDING YOUR UNIT.-
To fold your unit, Fig.10, do the
following:
1.- Use one hand to pull the knob (59)
back, Fig.J, and use the other hand to
lower the sliding seat rail until you
hear the knob (59) click into position,
Fig.H.
2.- Pull out the locking pin (63) and
swing the rear support (62) backward
and reinsert the locking pin (63).
12 MOVEMENT & STORAGE.-
The unit is equipped with wheels (77)
to make it easier to move. The wheels
located at the front of your unit make it
easier to move it into a chosen
position, by lifting the rear of the unit
up slightly and pushing it, as shown in
Fig.11. Store your unit in a dry place,
preferably not subject to changes in
temperature.
MAINS CONNECTION.-
Transformer 6 V- 1Amp.
Insert the jack (m) on the transformer
(119) into the connection hole (n) on the
main body (1) (bottom, rear of the
machine) and then plug the transformer
into a 220 V mains supply, Fig.12.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
15