Publicité
Les langues disponibles
Les langues disponibles
Product Overview
Game Talk Pro-2 Wireless
A. Sync Button
B. Power/Mute Button
C. FX Button
D. Status Indicator Lights
E. Game Chat Volume Control
F. Game Volume Control
G. Charging Jack
H. Adjustable Microphone Boom
Audio Transmitter
A. Connect to PS3 A/V MULTI OUT Connector
B. Sync Light
C. Connect PS3 A/V Cable
(Not required if you are using HDMI cable)
Charging the Headset
The Game Talk Pro-2 Wireless comes
with a built-in Lithium Polymer
battery that needs to be charged
before fi rst use.
To do this, please follow
these steps:
Step 1:
Connect the USB charging cable (supplied) into any free USB port on your PS3.
Step 2:
Connect the mini USB end of the charging cable to the Charging Jack, located on the Game Talk Pro-2
Wireless.
Step 3:
Whilst charging, the Status Indictor Lights will repeatedly fi ll up in sequence.
Step 4:
When charging is complete all four Status Indicator Lights will remain static. Disconnect the USB charging
cable from your PS3 and the Charging Jack on the Game Talk Pro-2 Wireless.
In order to confi gure the PS3 Audio Output Setting, please follow these steps:
Step 1:
Turn on your PS3 and go to the PS3 Home Menu.
Step 2:
Scroll to 'Settings' and select 'Sound Settings' .
Step 3:
Select 'Audio Output Settings' .
Step 4:
When entering the Audio Output Settings screen the option 'Audio Input Connector / SCART /
AV MULTI' needs to be already highlighted indicating that the setting is correctly confi gured.
If this is the case, please proceed to the next section. If this is not the case please refer to
'Step 5' of this section.
Step 5:
Scroll down to and select the option 'Audio Input Connector / SCART / AV MULTI' .
Step 6:
You will now need to save the settings to complete the change in confi guration.
Connect the Audio Transmitter with the Game Talk Pro-2 Wireless
The Game Talk Pro-2 Wireless will automatically detect the closest "Audio Transmitter" when powered on.
It will need to be synchronized with your PS3 as detailed in the next section to communicate with other
players during multi player sessions.
In order for the Game Talk Pro-2 Wireless to automatically connect to the Audio Transmitter. Firstly connect
the Audio Transmitter to the PS3 as detailed in the previous section. Ensure the PS3 is turned on and
confi rm the Sync Light on the Audio Transmitter is fl ashing. Turn on the Game Talk Pro-2 Wireless by
pressing and holding the Power/Mute Button for a number of seconds, until the Status Indicator Lights
begin to fl ash. The Audio Transmitter will now automatically sync with the Game Talk Pro-2 Wireless.
This is confi rmed by the Sync Light on the Audio Transmitter remaining static.
Registering the Game Talk Pro-2 Wireless with the PS3
Before you can use the Game Talk Pro-2 Wireless for the fi rst time to communicate with other players, you
need to register the Game Talk Pro-2 Wireless with the PS3. When successfully registered you also need to
set the Game Talk Pro-2 Wireless as the input and output audio device.
Registering the Game Talk Pro-2 Wireless
In order to register the Game Talk Pro-2 Wireless with the PS3, please follow these steps:
Step 1:
Turn on your PS3 and go to the PS3 Home Menu.
Step 2:
Scroll to 'Settings' and select 'Accessory Settings' .
Step 3:
Select 'Manage Bluetooth® Devices' .
Step 4:
Select 'Yes' to confi rm that you want to register a device.
Step 5:
Turn on the Game Talk Pro-2 Wireless by pressing and holding the Power/Mute Button for a
number of seconds, until the Status Indicator Lights begin to fl ash.
Step 6:
Press and hold the Sync Button on the Game Talk Pro-2 Wireless, so that the Status Indicator
Lights fl ash in sequence.
Step 7:
Select 'Start Scanning' .
Step 8:
When found by the PS3 select 'Game Talk Pro-2' .
Step 9:
You will now need to enter a pass key, select the empty box to view the pass key entry screen.
A
B
4
6
Charging Time
Fully charging the built-in battery can take up to four hours. While charging, the headset will not function
and it's perfectly normal for the headset to become slightly warm.
When to Recharge
When the battery begins to run low the headset will emit 2 audible beeps, these beeps will repeat until
the unit is plugged into the PS3 console to recharge – or when battery life totally expires and power is
lost. In order hear the 2 audible beeps you will need to ensure that the Game Chat Volume control is set to
a reasonable level.
Important Charging Precautions
For Safety reasons, and to prevent damage to the headset, please ensure that you follow these
recommendations:
• Please recharge the headset at normal room temperature, do not recharge the headset in temperatures
in excess of 30oC.
• Only use the USB charging cable supplied to charge the headset.
C
Connecting the Audio Transmitter to the PS3
The following steps explain how to connect the Audio Transmitter to the PS3 using the standard A/V cable
or a HDMI cable.
Step 1:
Ensure that the console is powered off and disconnect the inserted
PS3 A/V cable.
Step 2:
Connect the Audio Transmitter to the A/V MULTI OUT
connection on the PS3.
Step 3:
Connect the A/V cable to the rear of the
Audio Transmitter or connect the HDMI cable to
the HDMI connection on the PS3.
Confi guring the PS3 Audio Output Setting
Before you can use the Game Talk Pro-2 Wireless for the fi rst time to hear game sound, you need to ensure
that the PS3 Audio Output Setting is correctly confi gured. This setting may already be correctly confi gured,
but we would recommend confi rming how the setting is confi gured before continuing. If this setting is not
correctly confi gured you will not hear any game sound. Some PS3 consoles which are using an early release
of the PS3 System Software (fi rmware) may not include the Audio Output Setting and are not aff ected.
Step 10:
Using the onscreen keypad enter the pass key '0000' and select 'Enter' to confi rm the entered
pass key.
Step 11:
To complete the registration select 'OK' . After a few seconds the Game Talk Pro-2 Wireless and
console will be synchronised. The fi rst Status Indicator Light will remain static at this stage
indicating the headset is synchronised with the console.
Setting as the Input and Output Audio Device
After successfully registering the Game Talk Pro-2 Wireless with your PS3 you will now need to set the
headset as the input and output audio device. To do this, please follow these steps:
Step 1:
Return to the Accessory Settings screen and select 'Audio Device Settings' .
Step 2:
Select 'Input Device' , scroll up or down to and select 'Game Talk Pro-2' .
Step 3:
The Game Talk Pro-2 Wireless should now be set as the Input and Output Audio Device.
Ensuring that the Game Chat Volume Control is set to a reasonable level, perform a
microphone test by talking in to the microphone. The onscreen sound meter will indicate the
microphone level. If required increase or decrease the microphone level to a preferred level
using the 'Microphone Level' setting.
Step 4:
Select 'OK' to save the settings and complete the registering process.
You are now ready to communicate with other players, please refer to the next section for advice on
wearing the headset.
Wearing the Headset
The microphone boom can be worn on either side of your head. Rotate the headset arm over the top of the
headset to change side as shown. Position the mouthpiece so that it is close to your mouth without being
directly in front of it. This will allow the mic to pick up your voice clearly without picking up your breathing.
5
Adjustments can be made on either side of the
headset as shown by sliding it outwards to achieve
a comfortable fi t.
7
Publicité
