Pro Audio DMX512 Manuel D'utilisation page 8

User manual
3. MANUAL
• Digital display specification:
Use the display to set the address code with the 3 setting buttons. Each decoder has 24 address codes.
The first number on the digital display shows the "Function" symbol with three possible options: A, H, or
S. The last three numbers show the date starting from 001 to 512.
 The first letter is A: this means that the decoder is under the DMX512 signal control. Connect the
decoder to a DMX console with a network cable. If the display shows A001, it means that the first
address code is 001, and the other 23 channels are corresponding to 002, 003, 004 ... 024. If you
connect this decoder to another one, the other decoder's first address code will be 025, so the other
23 channels are 026, 027, 028 ... 048. This way you can connect it to multiple decoders, while
controlling just one. If the address code of two or several decoder's is the same, this means that these
decoders are changing in the same way, and that they can be synchronized to control an effect.
 The first letter is H: the built-in mode function means that the decoder works in the built-in program.
These are the build-in modes:
Symbol
H-00
H-01
H-02
H-03
H-04
 The first letter is S: is the built-in speed function. Only two codes are valid: H-08 and H-09. Press the
SET button lightly to enter the adjustable speed mode, then press the +/- button to navigate through
the 11 speed options. Other functions are not effective.
Mode
Turn OFF Output
Static red
Static green
Static blue
Static yellow
24 Channel DMX Decoder
Symbol
H-05
H-06
H-07
H-08 7 color jump (adjustable speed)
H-09 7 color fade (adjustable speed)
Mode
Static purple
Static cyan
Static white
8