Important Safety Instructions - Pro-User SC800A Mode D'emploi

The Pro-User SC800A is a member of the family of advanced mobile Jump Starters manufactured by Pro-
User Europe GmbH. The Pro-User Jump Starter enables you to securely start your 12V vehicle in case
your battery is weak. The Supercapacitor Jump Starter SC800A with up to 800A peak power is designed
to jump start 12V vehicles with up to 3000ccm gasoline or 2500ccm diesel engines. A built in ultra-
bright LED flashlight helps you jump-starting your vehicle at night or serves as a signal light.
We have taken numerous measures in quality control to ensure that your product arrives in top condition
and will perform to your satisfaction.
It is part of the "Intended Use" to carefully read and follow the safety and operating instructions. Any
other usage as the Intended Use and not following these instructions may result in a serious accident,
including damaged property, serious or even fatal injuries. Pro-User Europe is not liable for any usage of
the device, that is not intended by the manufacturer. If the device is passed on to another person, this
manual must also be handed over with it.
CAUTION: Please read this instruction manual carefully before starting up the device. Do
not operate the device unless you have fully read and understood all the provided
information. If you are not confident working with 12V/24V DC voltages or are unsure
of what you are doing, consider to seek for help by a professional breakdown service
(roadside towing service) or your vehicle´s manufacturer. Failure to observe these
instructions may cause an electrical shock, fatal or serious injury, material damage or
impair the function of the device.
Pro-User accepts no liability for direct or indirect damage caused by faulty assembly or connection, a
faulty usage, a usage of altered units or units that are known as damaged, a usage for purposes other
than described ("Intended Use") and especially caused by failure to follow these instructions.
Read your car´s owner's manual!
Some vehicle manufacturers have special requirements before jumpstarting the vehicle (e.g. fuses that
have to be removed or certain security demands). Some vehicles manufacturers place the battery in the
cargo area or trunk. These vehicles often have designated jump-start terminals.
CAUTION: This System is intended to be used only on vehicles with a 12 Volt DC
automotive battery. Do not use the jump starter on 6V/24V systems or for other things
than the intended usage. Not following these instructions could cause serious personal
injury or material damage.
CAUTION: Never touch or connect the red to the black clamps - This can cause dangerous
sparks, electric arcing or explosions. Use in dry environment only. Keep the unit dry and
clean. Do not use the unit close to open fire. Do not operate the unit in explosive
atmospheres, such as in the presence of flammable liquids, gases or dust. Stop charging
or using the device and power-off the device, if the unit is getting hot, is smoking or
leaks any liquid.
INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

3