Table des Matières

Publicité

1) Plug the AC/DC adapter with DC 12V output into a standard 230V outlet.
2) Switch the unit on and off by pressing the POWER button.
3) Plug the signal (such as DVD) cables into the input jacks located on the rear of the unit making sure that the red cable
is inserted into the red jack, the white cable is inserted into the white jack and the yellow cable is inserted into the
yellow jack. The red and white jacks are right and left tracks, the yellow jack is video input.
4) Plug the play (such as TV) cable into the output jack; again ensuring that the correct colour coded jacks are used.
5) Plug the microphone into the MIC 1 and MIC 2 jacks, two people can sing at the same time.
6) Rotate the MUSIC VOL knob clockwise to adjust the desired music sound level.
7) Rotate MIC 1 and MIC 2 VOL knob clockwise to adjust the desired microphone sound level.
8) Rotate the ECHO knob clockwise to adjust the microphone echo effect.
9) Bypass function: Remove the AC-DC adapter from the socket, and press the POWER button to switch the unit off, you
can still listen to the music, but you can not sing over the microphone.
Specifications:
Power supply: AC 230V ~ 50Hz
DC-IN: 12V / 100mA
Music input: 500mV/1V
Music output: 2V
MIC input: 1mV
MIC output: 2V

Safety precautions:

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ENGLISH
1. Power button
2. Power LED indicator
3. Music VOL knob
4. Echo knob
5. MIC 1 VOL knob
6. MIC 2 VOL knob
To reduce risk of electric shock, this product should ONLY be opened by an authorized
technician when service is required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the product to water or moisture.
7. MIC Jack
8. MIC 2 Jack
9. DC jack
10. Output jack
11. Input jack
2

Publicité

Table des Matières
loading

Table des Matières