Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User Manual
05
+0,2
1
-0
06
07
CAP PLUS COVER LAYER: To cover the Cap
Plus cover with a finish that matches the desk
+0
(wood or another material), cut a layer with the
282
-0,2
same dimensions shown in figure 5.
+0
101
-0,2
IMPORTANT: If necessary, respect the position
and direction of the wood grain.
Contact adhesive is recommended for securing
the material to the cover (in the case of wood or
another porous material). For materials such
as leather or synthetic leather , do not use
adhesives containing cyanoacrylate. Adhesive
not supplied with the product.
Check that the box cover opens perfectly to
90º.
The product is completely installed.
For any questions on the profile frame, contact
us at:
oficinatecnica@ib-connect.com
05-06
Publicité
Table des Matières
