Sennheiser L 151-10 Notice D'emploi page 9

Cascading several charging units
Several charging units can be cascaded together with the metal rails mounted at the
bottom of each charging unit. The charging units are then powered by a common mains
unit:
• A single charging unit can be powered by the NT 92 mains unit
• Up to five charging units can be powered by the NT 2013 mains unit
(N.B.:Do not use the NT 2013 for a single charging unit!)
Unscrew the screws and slide out
the rails. With the rails half out,
reinsert two screws and screw them
tight. Slide on the second unit (with
rails removed), reinsert the other
two screws and tighten them.
Repeat for further units (see
diagram).
The illustration on the right shows
three cascaded charging units. 30
stethoset receivers or the
corresponding number of accupacks
can be recharged and stored.
NT 2013
3 x L 151-10
9