BOJ KT-1700 Manuel D'utilisation page 3

• If the kettle is overfilled, boiling water may spill out.
• Always ensure the lid is closed and do not lift it while the water is boiling. Scalding may occur if
the lid is removed during the brewing cycles.
• This appliance is intended to be used in household and similar applications such as:
• Staff kitchen areas in shops, offices and other working environments;
• Farm houses;
• By clients in hotels, motels and other residential type environments;
• Bed and breakfast type environments.
• Save these instructions.
Description
1- Spout
2- Lid
3- Body
4- Water gauge
5- Lid release button
6- Handle
7- Base
8- Switch
Before using your Kettle
If you are using the kettle for the first time, it is recommended that you should clean your kettle
before use by boiling a full kettle of water twice and then discarding the water. Wipe the surface
with a damp cloth.
Note: the max capacity of kettle is 1.7 L.
Operation of your Kettle
1. To fill the kettle, remove it from the power base and press the lid release button, fill with the
desired amount of water, and then close the lid. Alternatively, the kettle may be filled through
the spout. The water level should not exceed MAX mark or sit below MIN level. Too little water
will result in the kettle switching off before the water has boiled.
Note: Do not fill the water over the maximum level, as water may spill out of the spout when
boiling. Ensure that the lid is firmly in place before plugging the power outlet.
2. Position the kettle on the power base.
1
3
4
7
- 3 -
English
2
5
6
8