Publicité
Les langues disponibles
Les langues disponibles
3
5
4
7
Assemble the remaining parts (5,4,7,3). Be careful to align the
main body's key (1) onto the light's (5) keyway. See detail
5
LOCKING
RING
Choose your union (9) and screw it onto the
main body (1) with the locking ring. Connect
or glue, your inlet hose.
Usage
Plug the StarWhite wire into the switch harness, connect the harness to the AC adapter and then plug the power cord to the electrical outlet.
To light up your StarWhite simply press the rocker switch on the cord.
Winterizing
To prevent damage to your STARWHITE, you must remove most of the assembly parts for winter.
Only the main body (1), the wall plate (2) and the two wall gaskets (6) can remain.
See image of step 2 for reference.
Spring pool opening
Apply silicone grease to all your STARWHITE o-rings before reassembling.
M10067A
INSTALLATION
DETAIL
3
6
9
Raise the water level to the
appropriate level for your pool.
GUIDE
4
4
Screw the compression nut (3)
DO NOT TIGHTEN. Position the
7
STARWHITE
Install your AC adapter preferably sheltered from the elements.
Connect the light to your AC adapter. Read the following
instructions before connecting to power outlet.
STARWHITE
9413-2950
3
Screw the compression nut (3)
until you feel a slight resistance.
Complete by adding a1/4 turn.
DO NOT OVER TIGHTEN. The water
tightness is not determined by the
compression nut.
ON/OFF
ADAPTER
SWITCH
POWER OUTLET
(NOT INCLUDED)
3
2
Publicité
