LENCO DAC-100 Mode D'emploi page 4

During file transmission, please handle with care and operate in a static-
free environment.
10. Warning! Never insert an object into the product through the vents or
openings. High voltage flows through the product and inserting an object
can cause electric shock and/or short circuit internal parts. For the same
reason, do not spill water or liquid on the product.
11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or
near swimming pools.
12. Do not use this device when condensation may occur.
13. Although this device is manufactured with the utmost care and checked
several times before leaving the factory, it is still possible that problems
may occur, as with all electrical appliances. If you notice smoke, an
excessive build-up of heat or any other unexpected phenomena, you
should disconnect the plug from the main power socket immediately.
14. This device must be well ventilated at all time!
15. This device must operate on a power source as specified on the
specification label. If you are not sure of the type of power supply used
in your home, consult your dealer or local power company.
16. The socket outlet must be installed near the equipment and must be
easily accessible.
17. Do not overload ac outlets or extension cords. Overloading can cause
fire or electric shock.
18. Devices with class 1 construction should be connected to a main socket
outlet with a protective earthed connection.
19. Devices with class 2 construction do not require an earthed connection.
4