LG 49SK85 Manuel D'utilisation page 21

SmartShare PC SW Installing & Setting
1 Install the SmartShare PC SW programme on your PC.
2 Go to www.lg.com. Then, select your region.
3 Select SUPPORT. Then, select Drivers & Software, SOFTWARE UPDATE or Software & Firmware.
4 Search for your model. Then, select SmartShare PC SW.
5 You can run the programme when installation is complete.
NOTE
y SmartShare service is only available if TV and other devices are connected via a single AP (Router).
SmartShare Connection to Smartphone
1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must
on the same local network.
2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG
phones).
3 Enable your smartphone to share content files with other devices.
4 Open Device Connector application.
(Home) → Device Connector → Smartphone → CONTENT SHARE.
5 Select the file type you want to play (movie, audio or photo).
6 Select a movie, music or photo file to play on the TV.
7 Play the media file to view and enjoy it on your TV.
* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may
take a few minutes.
(Home) → (Settings) →
1
CHECK FOR UPDATES
2 After checking the version of the software, update it.
If you check the "Allow Automatic Updates", you can update the software automatically.
Updating the TV Firmware
) (All Settings) →
(
GENERAL
Picture
Eco Mode
Sound
Mobile TV On
Programmes
SIMPLINK (HDMI-CEC)
LG Wireless Keyboard
Network
Settings Help
General
No Signal Image
Reset to Initial Settings
Safety
About This TV
Accessibility
User Agreements
General → About This TV →
ABOUT THIS TV
Picture
General /
Sound
Software Version xx.xx.xx
Allow Automatic Updates
ꔐ
Programmes
CHECK FOR UPDATES
Network
TV Information
[LG] webOS TV
General
User Guide
Open Source Software Notice
Safety
Set ID : 1
Accessibility