Publicité
Les langues disponibles
Les langues disponibles
User Manual
Intended use:
This product is intended for use as an electric air pump. This device is
intended for private, non-commercial use only. The device should only
be used in a household or similar environment. The device may not be
used in environments with a corrosive or explosive atmosphere or for
medical purposes. The device may only be used in accordance with
these instructions for use. Any use other than that described in these
operating instructions is considered improper use. We reserve the
right to make changes in the course of technical progress.
About the product:
We are very pleased that you have chosen our electric air pump
"Breeze".
With the electric air pump "Breeze" laborious pumping is a thing of the
past.
Thanks to the built-in 2.200 mAh battery you can easily pump up
bicycle tires, balls and many other things.
Thanks to the extensive accessories almost every object can be
pumped up.
Scope of delivery:
Electric air pump Breeze
Air Hose
Adapter needle, tip & short tip
Charging cable
Security advice
Specifications:
Size
Approx. 160 x 44 x 44 mm
Weight
Approx. 218 g
Capacity
2.200 mAh
Nominal power
5 V / 2 A
Waterproof
IPx3
Maximum air pressure
120 kPa / 17.4 psi / 1.2 Bar
Maximum air passage
6,0 l / min
Operating temperature
-20°C - +60°C
Function:
Operation:
Charging the battery:
The electric air pump has an integrated battery. If the battery is empty,
the air pump switches off automatically. Please charge the electric air
pump each time it is empty.
1.
plug the charging cable into the Micro-USB input
Connect the USB port to the USB 5V power connector.
The LED flashes green during charging.
1.
When fully charged, the LED will be solid green.
2.
When charging is finished, unplug the power cord for
safety.
Use the pump function:
1.
Select the attachment that matches the part to be
inflated from the accessories supplied. Screw this either
directly to the pump output or to the air hose and
screw it to the output.
2.
Now connect the attachment to the part to be inflated.
3.
Press the on/off button. The pumping process starts
now.
4.
To stop the pumping process press the on/off button
again. Take care not to expose the inflatable part to too
much pressure.
5.
Separate the attachment from the part to be inflated.
6.
unscrew the attachment and the air hose from the
pump.
Use the vacuuming function:
1.
Fill the vacuum bag (not included in delivery) with the
textiles you want to vacuum. Close the vacuum
accumulation bag.
2.
Open the lid of the vacuum accumulation bag and hold
the vacuum outlet (if necessary with the air hose) over
it.
3.
3. press the on/off button. The vacuuming process will
now start.
4.
To stop the vacuuming process, press the On/Off key
again. Finish the process at the latest when there is no
more air in the bag.
5.
Remove the air pump and close the lid of the bag
quickly.
Remarks:
1.
When the battery of the electric air pump reaches a low
level, the LED will be red to remind you to charge the
battery as described.
2.
Whenever you want to stop an inflation or vacuuming
process, press the on/off button.
Safety Instructions:
Check the electric air pump for damage before use. If there is visible
damage, a strong smell or excessive overheating of components,
immediately disconnect all cables and/or plugs and stop using the unit.
Do not expose the electric air pump to moisture.
Never leave children unattended with the packing material. The
packaging material poses a choking hazard.
Changes to the electric air pump and technical modifications are
not permitted. Warranty is void.
Keep away from children
Keep away from rain and water
Do not drop and do not push against
Do not use near flammable and explosive materials
Please take a break after 8 minutes of continuous pumping.
The air pump stops automatically after 15 seconds if the air
pressure cannot be monitored.
Please stop the pump if it gets too hot or if you hear unusual
noises when pumping up. Cool down the pump at least 15
minutes before touching it.
Please recharge it every 3 months if it is not used for a long time.
Make sure that there is enough power supply if you want to
inflate the device without plugging it in (the first charge takes 2
hours, the normal charge 1.5 hours).
Do not turn off the engine when plugging in the cigarette lighter.
For your and other safety, use the air pump and accessories
according to the manufacturer's instructions.
Miscellaneous:
Please use the qualified power supply of the compressor.
The compressor can be used for most vacuum bag connectors
that the user can buy on the market.
If you use the improvement mode, please note that the
compressor does not stop the process automatically. Please do
this manually. Otherwise there is a risk of damaging the tire,
swim ring, swimming ball, etc.
Due to the power limitation, the compressor cannot pump up
large tires: e.g. car, truck.
Not waterproof and cannot suck off water.
Mode d'emploi
Usage prévu :
Ce produit est destiné à être utilisé comme une pompe à air
électrique. Cet appareil est destiné à un usage privé et non
commercial uniquement. L'appareil ne doit être utilisé que dans un
environnement domestique ou similaire. L'appareil ne doit pas être
utilisé dans des environnements à atmosphère corrosive ou explosive
ou à des fins médicales. L'appareil ne peut être utilisé que
conformément au présent mode d'emploi. Toute utilisation autre que
celle décrite dans le présent mode d'emploi est considérée comme
une utilisation non conforme. Nous nous réservons le droit d'apporter
des modifications au cours du progrès technique.
À propos du produit :
Nous sommes très heureux que vous ayez choisi notre pompe à air
électrique "Breeze".
Avec la pompe à air électrique "Breeze", les pompages laborieux font
partie du passé.
Grâce à la batterie intégrée de 2.200 mAh, vous pouvez facilement
gonfler des pneus de vélo, des ballons et bien d'autres choses encore.
Grâce aux nombreux accessoires, vous pouvez pomper presque tous
les objets.
Contenu de la livraison :
Pompe à air électrique Breeze
Tuyau d'air
Aiguille d'adaptation, pointe et pointe courte
Recharger le câble
Conseil en matière de sécurité
Spécifications :
Taille
Environ 160 x 44 x 44 mm
Poids
Environ 218 g
Capacité
2.200 mAh
Puissance nominale
5 V / 2 A
Étanchéité
IPx3
Pression d'air maximale
120 kPa / 17,4 psi / 1,2 Bar
Passage d'air maximum
6,0 l / min
Température de
-20°C - +60°C
fonctionnement
Fonction :
Publicité
