Microsd Card; Wireless Mode; Cleaning And Maintenance - Velleman BTSP6 Mode D'emploi

5.3 MicroSD Card

Insert the microSD card into the microSD card slot. The speaker will start
playing the music files saved onto the card. Toggle through the files with the
back/volume – and forward/volume + buttons; hold the buttons pressed to
adjust the volume. Press the play/pause/mode to play/pause the music.

5.4 Wireless Mode

Switch on the device. It will automatically search for another active wireless
device. The PIN code is 0000 (4x zero). The device will act as a speaker
after a successful pairing.
When using with a mobile phone, press the play/pause/mode button to
accept/reject a call.
Press and hold the play/pause/mode button to deactivate the wireless
mode. Press and hold the LED on-off button to enter the wireless re-pairing
mode.
5.5 FM Radio
Insert an AUX cable in the AUX connector for better signal reception. Press
and hold the play/pause/mode button to activate the FM radio mode. Press
the play/pause/mode button to search for available frequencies. Toggle
through the available frequencies with the back/volume – and
forward/volume + buttons; hold the buttons pressed to adjust the volume.
5.6 AUX Mode
Connect the device to the AUX output of an audio source, e.g. mobile
phone, notebook, MP3 player, etc. The device will now act as a speaker.
6. Notes
Please do not set the volume level to its maximum as this will cause
distortion.
Also, this device is capable of producing sound levels that could cause
permanent hearing loss. Do not operate for a long period of time at high
volumes or at a level that is uncomfortable.

7. Cleaning and Maintenance

This device does not need any particular maintenance.
•
Occasionally clean with a damp cloth to keep it looking new. Do not use
•
harsh chemicals, cleaning solvents or strong detergents.
V. 02 – 05/09/2016
BTSP6
5 ©Velleman nv