Publicité
Les langues disponibles
Les langues disponibles
English
1. To fix the tool holder on the machine,
introduce the shank and use the
reference surface (1) to adjust the
position. Tighten the 2 fixing screws
(important, make sure that the screws
have the same clamping force).
1
2.
Adjust the offsets of the 2 positions.
Zone industrielle C
Rte du Grammont 101
CH-1844 Villeneuve
Mode d'emploi
Operating instructions
Betriebsanleitung
Istruzioni per l'uso
P03-GSE-207 / P03-GSE-207-II
PCM WILLEN SA
SWISS MADE
Copyright © PCM Willen SA.
Garant:
BT
Validation : 15.09.2015
3.
When mounting or dismounting of
cutting tools, spindle lock on the planes
provided for this purpose, using an
adapted wrench.
4.
The
tool shank diameter should never
have a difference of more than 0.4 mm
compared to the clamping diameter of
collet
Example: clamping diameter 9.5 mm =>
Shank diameter 9.1 mm minimum.
MARK :
Never use the tool holder with
empty positions. Use the supplied
protection plug.
Tél ++41 21 967 33 66
Fax ++41 21 960 38 95
http://www.pcm.ch
email:
Document :
P03-GSE-207 (I+II)
1- Mode d'emploi
Page : 2 de 4
office@pcm.ch
Publicité
