Kasanova KIV000029NOC Manuel D'instructions page 13

WIRELESS VACUUM CLEANER
REMOVE AND WASH THE FILTRATION SYSTEM
Open direction
Open direction
Dust cup
Operation:
Fix the motor housing and open the dust cup according to the arrow direction,
as shown in figure 9. Remove the filter cotton and the filter net from the
dust cup, as shown in figure 10. The parts can be washed and dried. Then
replace the parts in the opposite direction as they were removed. For the first
installation of the filter, the direction of the arrow has to be roughly consistent
with the direction of the main engine air inlet, as shown in figure 11. Then aim
accurately at the notch of the filter frame and the protruding part of the dust
cup. Do not forget to install the sealing element.
It is recommended to clean the filter cotton and the filter net every time you
empty the dust cup.
Special reminder: Except dust cup and dust cup internal parts, the rest of the
parts are prohibited to clean!
(figure9)
Filter net Seal groove
Sealing element
Air intake
Arrows
Filter elements
Filter Cotton
Main engine
(figure10)
13