Applications; Prior To Operation - LEMAN MAX121 Manuel D'utilisation

account the working conditions and the work to be performed. Use of the power tool for operations different
from intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
SPECIAL REQUIREMENTS FOR ELECTRIC MIXER
1. Wear ear protectors. Exposure to noise can cause hearing loss.
2. Wear a dust mask. Do not inhale the harmful dusts generated. The dust can endanger the health of yourself
and bystanders.
3. Do not use the power tool with a damaged cord. Do not touch the damaged cord and pull the plug from
the outlet when the cord is damaged while working. Damaged cords increase the risk of an electric shock.
Warning: Reduce the working time to avoid risks related with too much vibration.
If the supply cord of this power tool is damaged, it must be replaced by a specially prepared cord available
through the service organization.
4. Do not use the power tool for explosive materials (e. g., easily inflammable solvents). Power tools
produce sparks which could ignite developing vapours.
5. In case the power tool should fall into the material to be stirred, pull the plug immediately and have the
power tool checked by an after-sales service agent. Material that has penetrated the power tool can cause
damage and lead to an electric shock.
6. Hold the machine firmly with both hands by the insulated gripping surfaces while working and keep
proper footing and balance at all times. The machine is more securely guided with both hands. Loss of
control can cause personal injury.
7. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting
accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an electric shock.
8. Switch off the power tool immediately when the tool insert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when the power tool is subject to overload or it becomes wedged in
the workpiece.
9. Do not mix food. Power tools and their accessories are not designed for processing food.
10. Keep the cord away from the working area. The cord may be entangled by the stirrer paddle.
11. The mixing container must be suitable for mixing and must stand securely. A container that is not
properly secured may move uncontrolled.
12. Ensure that no liquid splashes against the housing of the power tool. Liquid that has penetrated the
power tool can cause damage and lead to electric shock.
13. Follow the instructions and warnings in the Material Safety Data Sheets (MSDS) of the material to be
mixed. Material to be mixed may be harmful.
14. In the event of a power interruption, release the locking switch by pressing the on/off switch. This will
prevent the power tool from restarting unintentionally (risk of injury).
This machine is intended for mixing pulverised building materials such as mortar, plaster, adhesives, as well as
solvent- free paint, varnish and similar substances.
1. Power source check
Ensure that the power source to be utilized conforms to the power requirements specified on the product
nameplate.
2. Switch status check
Ensure that the power switch is in the OFF position. If the plug is connected to a power receptacle while the
power switch is in the ON position, the power tool will start operating immediately, which could cause a serious
accident.
3. Extension cord
GB

APPLICATIONS

PRIOR TO OPERATION

16