Operation; Before You Start; Power; Message Display Mode - Kenwood KDS-100 Mode D'emploi

B Y S
EFORE OU TART
The displays provided within this manual are for your reference only. Actual
displays may vary according to how your terminal is set up.
P
OWER
This terminal does not have a power switch. Power is supplied directly through
the cable attached to the mobile unit.
M D M
ESSAGE ISPLAY
N M
EW ESSAGES
When a message is received, the first few lines appear on the display. To
read the message immediately, press [READ] (key 1). To acknowledge that
you know there is a new message, simply press [OK] (key 5).
When you read the message, depending on its size, you may have to scroll
down to view the entire message. A small arrow at the bottom right of the
display will indicate whether or not you can scroll down. To scroll up and
down, use the
4

OPERATION

ODE
and keys.