Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NO HOT PLUG!
1.
Mount and tighten the screws
and plugs to secure the unit to
the wall. Left 10 cm of free space
around from each unit.
2.
Connect cables to audio/video
source. The signal source can be
from a surveillance monitor, DVD,
set-top box, CCTV and etc.
3.
Optionally,
loop-through RF input coaxial
cable.
4.
Connect cable to RF output to
STB/TV.
5.
Power supply connection: a)
Connect the earth cable; b) Connect the power plug to the unit mains connector; c)
Connect the power plug to the mains socket.
Cascade installation
DMH-341 unit has 1 AV analogue TV signal to RF output encoded as DVB-C Digital TV
signal.
Several DMH-341 units can be cascaded in order to increase the capacity. The maximum
capacity of a series of N units is 1xN incorporated TV signals. To cascade 2 or more units,
connect the RF output of the preceding unit to the TV input (loop-through) of the next unit
(see below illustration).
connect
the
1
3
4
2
5
26
Publicité
Table des Matières
