Publicité
Les langues disponibles
Les langues disponibles
Stair renovation
The angle template in the praxis
By this example you can see how easy and efficient the using of the angle template is. The following
example is from the System Rheingold company.
The string board will be cut
out of a board, like a panel or
polyester board, and just
glued on.
The cutting after drawing can
be done by a underground
saw or a circular saw.
After this you have to mess
the altitude, the length, and
the angel on the right and left
side of the stair riser.
Special thanks to www.rheingold-gmbh.com for the pictures.
With a good measure instru-
ment you can easily fast and
exact come to the correct
form.
To fix the step you just put
the special glue in snake line
on the old and the new step.
Step-by-step: The end of the
stair rise will be cut in a 45°
angle.
The transferring of the form
is really easy by the angle
template.
The new step has to be put
down and pushed back with
the fist or a special hammer.
After the step and the stair
riser are fixed you have to
close the rabbet with col-
oured silicon.
05
Publicité
