Cleaning And Care - WMF Ambient Mode D'emploi

Turn the WMF Ambient Light on and off using the WMF Easy Touch controls
▪ The WMF Ambient Light can be used in conjunction with the warming or cooling functions: the
appliance must be plugged in and turned on.
▪ The WMF Ambient Light is operated using WMF Easy Touch technology. Use the Ambient Light
touch control to turn the light on and off. Press the switch repeatedly to cycle through the three
brightness settings and turn the light off.
One press = 10 % brightness
Two presses = 50 % brightness
Three presses = 100 % brightness
Four presses = turn off
Note: If you do not want to use the WMF Ambient Light in conjunction with the warming and cooling
features, simply plug in the appliance and press the on/off switch. The right-hand LED on the glass
plate will light up white; this means that the appliance is in standby mode. In this mode, you can
select any WMF Ambient Light setting.

Cleaning and care

▪ Note: The air temperature may cause condensation to form on the glass and hotplate. After
removing the cooling element, use a tea towel to wipe any condensation off the hotplate.
▪ Unplug from the mains and if necessary allow the appliance to cool down.
▪ It is best to remove any fat and food scraps with kitchen towel while the glass plate is still warm to
the touch.
▪ Once the glass plate is cool to the touch, press the eject button to remove from the appliance.
▪ Wash the glass plate in lukewarm water with washing-up liquid and a sponge. The removable glass
plate is also dishwasher safe.
Note: Do not use abrasive detergents, metal scourers or oven cleaning products.
▪ Do not immerse the appliance in water or add water to clean. Simply put a little washing-up liquid
on a damp cloth, wipe the appliance and then pat dry.
14
For UK use only
▪ This product is supplied with a 13 A plug conforming to BS 1363 fitted to the mains lead. If the
plug is unsuitable for your socket outlets or needs to be replaced, please note the following. If the
plug is a non-rewireable one, cut it from the mains lead and immediately dispose of it. Never insert
it into a socket outlet as there is a very great risk of an electric shock.
▪ The replacement of the plug at the mains lead has to be done according to the following
instructions:
Important: The wires in this mains lead are coloured in accordance with the following code:
blue Neutral
brown Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
⋅ the wire which is coloured blue must be connected to the terminal which is marked with the
letter N or coloured black,
⋅ the wire which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red.
Do not connect any wire to the terminal which is marked with the letter E or by the earth symbol
or coloured green or green and yellow.
▪ If a 13 A (BS 1363) plug is used it must be fitted with a 13 A fuse conforming to BS 1362 and be
ASTA approved. If any other type of plug is used, the appliance must be protected by a 10 A fuse
either in the plug or adapter or at the distribution board.
If in doubt - consult a qualified electrician.
▪ Never use the plug without closing the fuse cover.
The appliance complies with European directives 2014/35/EU, 2014/30/EU and
2009/125/EU.
At the end of its life, this product may not be disposed of in normal household
waste, but must instead be taken to a collection point for recycling electrical and
electronic appliances.
The materials are recyclable in accordance with their labelling. Reuse, recycling
and other ways of reutilising old appliances make an important contribution to
protecting our environment.
Please ask your local authorities for information about the appropriate disposal
point.
End users are personally responsible for deleting any personal data that may be
stored on appliances they are disposing of.
,
15