senya SYCP-HB008 Notice D'utilisation page 33

Note :
This programme does not have an automatic mixing function.
-
Use the blender speeds (1, 2 or 3) for between 20 seconds and 3 minutes with the
-
blender's variable speed control in order to obtain the required consistency.
1- Do not place the food in the bowl. Pour 0.8 L of water.
2- Put the steam basket (9) in the bowl (2). Add your ingredients.
3- Press the button to switch on the appliance. The
red colour) and the other buttons flash (blue colour).
4- Press the
5- The programme automatically starts and the cooking time takes about 25-30 minutes.
During the cooking process, the
6- At the end of the cooking process, an audible signal will sound and the
switches off.
Note :
- When the "Steam" programme is enabled, the chopping blade no longer rotates.
The auto memory function can be used with all programs for hot preparations. This function
allows you to add more ingredients to your preparation during the cycle, while keeping the
selected setting at the beginning.
1. Unplug the device or remove the product cover to put it on pause
2. Carefully put the lid on and add the ingredients to the bowl
3. Replace or reconnect the device. The product will resume the current cycle.
III.5 USE OF THE MODES : COLD PREPARATIONS
6 manual programs. To activate manual programs, simply turn the blender dimmer (7). No
need to press the on / off button (3).
Steam cooking mode:
(Steamed vegetable/fish/meat)
button that lights up (continuous blue colour).
Auto memory function
button remains permanently lit (red colour).
33
button lights up (continuous
button