Table des Matières
Publicité
Niveau de declenchement
Le niveau de dé clenchement et la pente dé finissent le point de dé clenchement,
Pente positive
Point de dé clenchement
You can adjust the trigger level for a selected analog channel by turning the Trigger
Level Knob.
You can push the Trigger Level Knob to set the level to the waveform's 50% value
immediately. If AC coupling is used, pushing the Trigger Level knob sets the trigger
level to about 0 V.
The position of the trigger level for the analog channel is indicated by the trigger level
icon
(if the analog channel is on) at the left side of the display. The value of the analog
channel trigger level is displayed in the upper- right corner of the display.
56 User Manual
Pente né gative
Signal d'entré e
Trigger Level
Publicité
Table des Matières
