Safety Tips; Product Description; Pack Contents - Vogue Y749 Mode D'emploi

Telephone Helpline: 0845 146 2887 (United Kingdom)

Safety Tips

• Never overload the shelf, causing it to bend.
• Care must be taken when cleaning/handling the
shelf to avoid possible injury from exposed edges.

Product Description

• Y749 - 600 x 300mm Wall Shelf
• Y750 - 900 x 300mm Wall Shelf
• CB912 - 560 x 560mm Microwave Shelf
• CD550 - 560 x 460mm Microwave Shelf

Pack Contents

Note: Be sure to check all packaging
materials for any small parts that may
have come loose during transportation.
• Stainless steel wall shelf x 1
• Stainless steel shelf support x 2
• Bolt x 4 (CB912/CD550 x 6)
• Nut x 4 (CB912/CD550 x 6)
• Washer x 4 (CB912/CD550 x 6)
Assembly
Remove all protective film from the parts, taking care to avoid scratching the surfaces [A].
1.
Slot the shelf supports against the ends of the shelf [B & C].
2.
Position the supports as required. Slide a bolt through each hole. Secure with a nut and washer.
3.
Use the shelf supports as a template to mark the screw holes in the wall.
4.
Attach the shelf to the wall using suitable screws (not supplied) [D].
5.
Note: Ensure the mounting substrate can support the fully loaded weight of the shelf
(50kg). If neccessary, seek professional help to ensure the shelf is safely mounted.
Cleaning
• Clean the shelf regularly using a cleaning agent suitable for use with stainless steel.
• Always remove cleaning agent residue. This can discolour the surface of the shelf.
• Never leave the shelf surface damp as this can cause discolouration.
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of VOGUE.
Every effort is made to ensure all details are correct at the time of going to press, however, VOGUE reserve the
right to change specifications without notice.
Model featured: Y749
UK
1