General Guidelines; Charging The Battery - Toolland DTB10001 Mode D'emploi

3.

General Guidelines

•
Refer to the Velleman
manual.
•
All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
•
Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.
•
Keep this manual for future reference.
4. Overview
1
2
3
4
5
6
7
8
9
10
11
12
5.

Charging the Battery

1. Locate the charging connection on the handle and open the cover.
2. Connect the charger to the charging connection.
3. Make sure the charger plug is well-connected and inserted but do not force.
V. 01 – 25/03/2020
®
Service and Quality Warranty on the last pages of this
tank
filter
sucking hose
gasket
cover L
battery
cover for charging mouth
cover for on-off switch
screw cover
O-ring
pump
pump cover
DTB10001
13
14
15
16
17
18
19
20
21
22
23
5
M3x12 screw
plastic hoops
cover R
hose
handle cover
single-ear hose hoops
handle
handle nut
lance holder
lance
strap
©Velleman nv